Project guides

How much concrete for a 10 × 10 slab?

A 10 by 10 foot slab has 100 square feet of surface area. At four inches thick, its volume is 100 × 4 ÷ 12 = 33.333 cubic feet. Divide by 27 to obtain 1.235 cubic yards.

How to estimate concrete for fence posts

Measure the actual hole diameter and concrete fill depth. Subtract the volume displaced by the post; for a square post use its actual width squared.

Convert gravel volume to US tons

Multiply area in square feet by depth in inches divided by 12 to obtain cubic feet. Divide by 27 for cubic yards.

Concrete slab cost: how to build a material and labor estimate

A 20 by 10 foot slab at four inches uses 2.47 cubic yards before waste. Add 10% and multiply 2.72 cubic yards by your supplier quote. At $150 per yard, material alone is about $407.

How to calculate concrete for strip footings

A 40-foot strip that is 2 feet wide and 12 inches deep contains 80 cubic feet, or 2.96 cubic yards. Add separate strips without counting intersections twice.

Concrete for round forms: diameter and depth

A 12-inch internal diameter and 4-foot fill gives π × 0.5² × 4 = 3.14 cubic feet per form. Four forms need 12.57 cubic feet before waste.

How many bags of concrete do you need?

Divide the required cubic feet by the actual bag yield. A 12 cubic foot pour using bags yielding 0.6 cubic feet needs 20 bags before waste.

Estimating concrete blocks for a wall

A 10 by 8 foot wall has 80 square feet. A nominal 16 by 8 inch module covers 0.889 square feet, so the area estimate is 90 blocks before waste.

Concrete driveway budget checklist

A 12 by 40 foot driveway has 480 square feet. At five inches thick it contains 200 cubic feet, or 7.41 cubic yards before allowance.

How to estimate pavers for a patio

A 120 square foot patio using an installed 8 by 4 inch paver module needs 540 pavers before cuts. At 10% extra, order 594.

Roof area from footprint and pitch

A 1,200 square foot roof footprint at 6:12 pitch has a multiplier of √1.25, giving about 1,342 square feet of roof surface before waste.

Roof pitch versus angle explained

A rise of 6 inches per 12 inches of horizontal run gives a 50% slope and an angle of about 26.57 degrees.

How many shingle bundles to buy

For 1,500 square feet of roof surface and 10% waste, divide 1,650 by the bundle coverage. At 33.33 square feet, round up to 50 bundles.

Roof replacement estimate: what to include

For 1,500 square feet of sloped surface, a $3 material rate and $5 labor rate with 10% material waste gives $12,450 before fees.

Rafter length using rise and run

A 12-foot horizontal run at 6:12 pitch has a 6-foot rise and a geometric diagonal of 13.42 feet.

How much mulch for a garden bed?

A 300 square foot bed with a 3-inch layer needs 75 cubic feet, or 2.78 cubic yards, before allowance.

Topsoil volume for lawn renovation

A 500 square foot area with two inches of new soil requires 83.33 cubic feet, or 3.09 cubic yards.

Estimating sand for bedding layers

A 160 square foot area at one inch depth requires 13.33 cubic feet of sand before adjustment.

Calculate sod rolls for a new lawn

A 600 square foot lawn with 5% waste and 10 square feet per roll needs 63 rolls.

Grass seed coverage for a lawn

For 2,400 square feet, a bag labeled for 1,000 square feet requires three bags before allowance.

Retaining wall block quantities

A 20 by 3 foot exposed wall has 60 square feet of face area. With 0.89 square feet per block, allow 68 blocks before waste.

Flooring boxes: calculate coverage and waste

A 12 by 15 foot room contains 180 square feet. With 10% waste and 20 square feet per box, round 198/20 up to 10 boxes.

Tile quantities for a bathroom floor

A 60 square foot floor with 15% extra needs 69 square feet of tile. At 12 square feet per carton, buy six cartons.

Paint gallons for walls and multiple coats

For 400 square feet of net wall area and two coats, divide 800 by a label coverage of 350 square feet per gallon. Round up to three gallons before extra allowance.

Drywall sheet count for a room

A total wall length of 40 feet at 8 feet high gives 320 square feet. A 4 by 8 sheet covers 32 square feet, so ten sheets cover the area before cuts.

Insulation packages for wall cavities

A 240 square foot target area and 40 square feet per package needs six packages before allowance.

Decking board coverage and material estimates

A 200 square foot deck with 10% extra requires 220 square feet of installed coverage. At 5.5 square feet per board, order 40 boards.

Fence panels and posts for a straight run

A 50-foot uninterrupted run with maximum 8-foot spans needs seven panels and eight posts.

Board feet versus linear feet

A board 8 feet long, 6 inches wide and 2 inches thick contains 8 board feet. Ten boards contain 80 board feet.

Calculate asphalt tonnage from area and thickness

A 1,000 square foot area at two inches contains 166.67 cubic feet. At 145 pounds per cubic foot, that is about 12.08 US short tons.